NDT Equipment

Light weight 240V AC magnetic yoke for Magnetic particle Inspection.

 

Available in the following configurations:

• MP-A2 – Yoke & Power Cable.

• MP-A2L - Add the white light attachment to MP-A2.

• MP-A2BL - Add the UV light attachment to MP-A2.

 

Power - AC 240V 50/60Hz, Related Current - 2.5 amps

Available pole distance - 75~210mm, Input Power Source - AC only

Weight / Dimension - 2.3kg / 230mm(L) x 45mm(W) x 182mm(H)

Lifting Power - 12LB (5.45kg) or More, Duty Cycle - 50 % (Max 5 sec on/ 5 sec off)

LED Lamp - 12W White LED Lamp, Illumination - 70mm: 4,000 Lux or more

 

Kit Contains:

AC Yoke, Heavy Duty Power Cord, Certificate of Conformance

Hard Carry Case (optional)

 

Accessories:

White light attachment, UV light attachment, Replacement Power Cable

Centrifuge Tube is used for the determination of content of solid particles in inspection medium for Magnetic Particle examination. The concentration of particles in the suspension is a very important parameter in the inspection process and must be closely controlled. The particle concentration is checked after the suspension is prepared and regularly monitored as part of the quality system checks. Generally, concentration checks are performed every eight hours or at every shift change.

Features:

• Easy and accurate measurement

• Monitor contamination level of the bath

• All our tubes are individually calibrated

• We have different least count centrifugal tubes for visible & fluorescent

• We also provide centrifugal tube with least count of 0.05 ml (Fluorescent) & 0.1 ml (Visible)

• Comes with a stand ACT-S

The Acumen365 is a battery powered handheld UV-A meter / photometer used to measured ultraviolet -A light, used for fluorescent inspection (non-destructive testing). The Acumen365 includes dual wavelength sensor detector used to measure both Ultraviolet and Visible light.

Features:

• Large Colourful LCD Screen Display.

• Compact & Handheld.

• One-meter flexible & detachable probe.

• Rechargeable Li-ion Battery.

• Continues 8 hours of battery backup in a single charge.

• USB C port for battery charging.

• Supplied with a protective carrying case.

• Able to measure both UV-A and visible illuminance.

• Visible light measurement in LUX as well as in Foot-candle

 

Kit Contains:

• Acumen365 UV-A meter

• Charging adaptor & USB A to USB C cable

• Certificate of Conformance

• Operating Manual

Heavy Duty, Ergonomic, light-weight design

IP54 sealed housing resists dust and water

Replaceable power cord

Exceeds ASTM lifting specifications

Convenient carrying case supplied with all yoke shipments

 

Technical Specifications:

• Electrical Requirement - 230 Volt - 50 Hz: 2.6 Amp

• Waveform - AC (Single Phase)  

• Tangential Field Strength - 2 KA/m RMS at center

• Lifting Force - 4.5 Kg / 10 lbs

• Duty Cycle - 50 % (Max 5 sec on/ 5 sec off)

• Yoke Weight - 2 Kg / 4.41 lbs

• Leg Span - 2.5-10.2 in / 65-260 mm

• Pole Contact - 20 x 20 mm

• Power Cord Length - 3 Meter / 10 ft.

Heavy Duty, Ergonomic, light-weight design

IP54 sealed housing resists dust and water

Field-swappable power cord

Isolated, replaceable trigger switch

Steel shields for leg protection

Exceeds ASTM lifting specifications

Tangential Field: 2Kamp/meter

Convenient carrying case supplied with all yoke shipments

Heavy Duty, Ergonomic, light-weight design

IP54 sealed housing resists dust and water

Field-swappable power cord

Isolated, replaceable trigger switch

Steel shields for leg protection

Exceeds ASTM lifting specifications

Tangential Field: 2Kamp/meter

Convenient carrying case supplied with all yoke shipments

LED UV & White yoke light included – long Lasting and more intense compared to traditional bulbs

AS 1171 MPI Sensitivity Block with 1.5mm side drill hole simulating a subsurface defect is used to verify the Magnetic particle test equipment/process

Available in A1018 Carbon Steel

The Calibration Block comes complete with hard plastic carrying case and Certificate of Conformance.

Calibration block No.1 is used for the calibration of UT Flaw detector and Probes,

Can be used of normal and angle probes in calibrating equipment and for determining probe characteristics

Metric version with 1.5 mm through drill hole available in A1018 Carbon Steel, 304 Stainless Steel and Aluminum.

The Calibration Block comes complete with hard plastic carrying case and Certificate of Conformance.

Calibration Block No.2 is used for the measurement of the beam angle and profile of angle probes and the determination of overall system gain.

Type 1 (API/BS) - 9x Holes

Type 2 (AS) - 4x Holes

Available in A1018 Carbon Steel, 304 Stainless Steel and Aluminium.

The Calibration Block comes complete with hard plastic carrying case and Certificate of Conformance.

Calibration block No.5 also known as Kidney calibration block is used for on-site calibration/verification of UT Flaw detector and Probes for normal and angle probes determining probe characteristics.

Available in 12mm or 25mm thickness & 1.5 or 5.0mm hole upon request

Available in A1018 Carbon Steel, 304 Stainless Steel and Aluminium.

The Calibration Block comes complete with hard plastic carrying case and Certificate of Conformance.

We offer a range of high-quality Ultrasonic Probes/Transducers. These include a Single & Dual Crystal – Normal/Straight beam probes, Shear wave/Angle beam probes & Custom probes of various sizes & types.

NDT Flawed specimens are specifically designed with a number of precise & various types of flaws in a wide variety of specimen geometries and alloy types. These specimens are used in various industries to facilitate the education, practice for NDT technicians and for NDT procedure development.

NDT Flawed specimens available in various geometries & material types.

Supplied with NDT test certificates with Flaw details & diagram.

Contact us with your requirement to receive a quote.